Fix FWP_E_TXN_ABORTED 0x8032000F in Windows Firewall

1. Reboot and restart the Windows Firewall service

This is the fix that works nine times out of ten. Don't skip it just because it's simple. The 0x8032000F error means Windows Filtering Platform (WFP) locked up a transaction — often because a third-party antivirus or VPN driver left something hanging.

1. Save any open work.
2. Click Start, then the Power icon.
3. Choose Restart (not Shut down — Restart clears the WFP state completely).
4. After the computer comes back up, press Windows + R, type services.msc, hit Enter.
5. In the list, find Windows Firewall. Right-click it and pick Restart.
6. If the service is stopped, right-click and choose Start.

After you restart the service, you should see its status change to Running. Then try whatever you were doing that gave the error — it should work now.

2. Check and fix Group Policy for Windows Firewall

Corrupted or conflicting Group Policy settings are the second most common cause. This happens a lot on corporate laptops or computers that changed domains.

1. Press Windows + R, type gpedit.msc, hit Enter. (If you get an error, you're on Windows Home — skip to fix #3.)
2. Go to Computer Configuration > Administrative Templates > Network > Network Connections > Windows Firewall.
3. Look at each policy under Domain Profile and Standard Profile. Any setting that says Enabled might block the firewall service from starting.
4. Double-click any policy that looks suspicious. If it's set to Enabled and says something like "Prohibit use of Windows Firewall" or "Do not allow exceptions," change it to Not Configured.
5. Click Apply and OK.
6. Close the Group Policy Editor.
7. Open a Command Prompt as administrator (right-click Start, choose Command Prompt (Admin) or Windows Terminal (Admin)).
8. Type this and press Enter:

   gpupdate /force

9. Wait for it to finish. You should see Computer Policy update has completed successfully.
10. Reboot again (I know, but it's needed here).

After the reboot, check if the error is gone by opening Windows Security > Firewall & network protection. If it shows Firewall is on, you're good.

3. Reset Windows Firewall with netsh

If the first two fixes didn't work, we need to reset the firewall completely. This clears all custom rules but fixes corrupted rules that cause the 0x8032000F error.

1. Open Command Prompt as administrator (same as step 7 above).
2. Type this and press Enter:

   netsh advfirewall reset

3. You should see Ok. on the screen.
4. Now restart the Windows Firewall service again:

   net stop MpsSvc
   net start MpsSvc

5. Type exit and close the prompt.
6. Restart your computer one last time.

After the restart, try the action that originally triggered the error — like starting a VPN, enabling a network profile, or running a game that uses Windows Firewall. It should work now.

Quick-reference summary table

One more thing: If you use a third-party antivirus like Norton, McAfee, or Bitdefender, try temporarily disabling it. Some of those programs hook into WFP and cause this error. If disabling it fixes the problem, you'll need to uninstall it completely or contact their support.